Test of F-1132 rust remover

F-1132 Rust remover on carbon steel

A piece of scrap metal was selected to represent real world situation. The plate had been left outside for about a year without any protection, see picture.

F-1132 Rust remover During

For this test we use soaking method, F-1132 can also be applied by brush, spray, rag etc to best suit your situation. Note that all F-1132 must be washed away from the substrate and surroundings after treatment is complete. This is an acid based product and proper PPE must be used.

F-1132 Rust remover After

After soaking is completed it is important to rinse all remaining rust remover away from substrate as remaining acid may cuase damage to the steel. This picture was taken without any agitation of the metal only flushing with domestic water (not high pressure). Tp protect the steel from "blooming" (turning red) we sprayed on a thin film of Eurolube F-1110 degreaser after flushing, the corrosion inhibitor provides protection while its alkalanity neutralizes and remaining acid.

 

F-1132 Rust remover to restore Stainless steel

F-1132 can be used to restore stainless steel that has been contaiminated by salt, carbon steel or other contaminants causing discoloration or corrosion. For this sample we used a shower head of SS3044

F-1132 Rust remover to restore Stainless steel

 

The rust remover will etch away foreign contamination and passify the surface of the stainless steel. Reaction is visible by foaming

F-1132 Rust remover to restore Stainless steel

After cleaning is completed it is important to flsuh thestainless steel in fresh water. Care should be taken to maintain low Cl contant as per industry standards. No agitation was made during this test, only fresh water flushing.

 

Please reload